Confirmed my Palit RTX 3060 Dual (non-TI, non-OC variant) achieved >120 MH/s mining ERG with these settings:
Using NBMiner on Hive OS, dual mining along with PhoenixMiner mining ETH.
The fan monitor of this Palit 3060 card always stopped at certain minutes after mining any coins in Hive OS, but he fan still running at last % set. To set another fan value, it has to be rebooted.
You have to change you mem timings with Polaris Bios editor. also Elpida mem is usually pretty bad. Try using your 1650 straps up to 1900 or 2000. If 2000 with 1650 straps doesn’t work use the 1750 straps
I changed the straps and timings yesterday, got ~64 mh/s per card. 
Maverick,
I have same RX580 4GB with Elpida memory. Is there any chance to download VBIOS from GPU5 and send me to zhoriev*gmail com, please!
I want to check compare with my vBIOS. If u want I’ll return mine to you.
P.S My cards is same model exclude two of them but work different with same bios settings.
The best settings for me is: Core: 1299 DPM: 1 VDD: 885 or 900 MEM: 1950 = 69 Mh 90-91w
Благодаря ти братле предварително!
A core with a frequency of 1299 will not work stably!
how do i configure my rtx 2070 super on MSI afterburner to have better performance and energy efficiency ??? (without wasting too much energy)
Nanominer
rtx 3070
Core -175 Mem +1250 PL 59%
170 MH/s @ 129W
RX580 4G is godlike.
RX 470 4GB = 54MH/s, SRBminer, Samsung mem, core: 1000, mem: 2000.
Nanopool 3.3.5-cuda11 - GTX 1080Ti 65 MH/s currently, 56 MH/s 24 hr average
Hello guys,
I’m wondering, how you get >65MH/s on the RX580.4G. I tried some settings from here, but just got less than now.
How could I increase hashrate without burning the cards too much? which settings would you provide? Thank you for ideas!
Sapphire RX 470 4GB = 64.5MH/s, SRBminer, Samsung mem, core: 1200 VDD: 950, mem: 2150 MVDD: 875. card 70w 54°C
just bought 2 rx 570 4g 
pretty excited to see your numbers
Nvidia 3060Ti FE
Miner: NBMiner
160MH/s (6h/24h averaged)
Core: Stock (+0MHz)
Memory: 8000MHz (+1200MHz)
Power: 120W (PL 60%)
r9 380 how much MH/s. is it mine today?
rx 550 / 4g how much MH/s. is it mine today?
This is very true, it is tricky on 3060. From 120 MH/s can be dropped as low as 60 MH/s if the combination is wrong. If I change back to previous settings, it increasing back to previous hashrate. Now I can get 123,2 MH/s with core 240, mem 2400, pl 110. Really have to try and error.
Do I need to use 470.05 driver & running at pcie 3.0 x8 to got this hashrate ? or the 3060 will run fine like other gpu ?
