Autolykos v2 hashrates

[udon]

it is 3080 Ti
Core - 100
Memory +950
PL 200W

[VegaERGObuster]

If you give me the card serial number I can help you with the timings, because there are two types of hunix memory

[jonek2k3]

was it stable? if yes then try to tune it up.

[fkanker]

Gainward GTX 1070 Phoenix GS
Windows 10 - NBminer
77.3 MH/s
Core +0
Mem +750
Power Limit 47%
Power 79W
Fan 30%
Temp : around 53°C

Gainward RTX 3060 TI Ghost V1 (LHR)
Windows 10 - T-Rex miner
around 134 MH/s (136 if ambiant temp low, still have to experiment around this)
Core -460
Mem +1350
Power Limit 51%
Power 101W
Fan 35%
Temp : 60°C
LHR kicks in at 900 MHz core clock

[arysps74]

GALAX RTX 3060 TI 1-Click OC LHR - Hynix
HiveOS - NanoMiner
Around 132-134 MH/s
Core 300
Mem +2150
Power Limit 121W
Fan 70%
Temp : 54°C

[ymnsrkn]

Hello there.
I have the following numbers on my card

[ymnsrkn]

amdmemtweak –RC 35 –RP 13 –RAS 22 –REF 65500 –RFC 148 –RRDL 4 –RRDS 4 –RCDRD 22 –RCDWR 4
I can’t go further than that, it keeps falling.

[Azot]

Rave OC

1070ti core 0 mem +1600 pl 90. 1070 core -50 mem +1150 ( samsung) +1050( micron) pl 90. --mt 6

[zxczxcxzcz]

Sapphire Vega 64 LC (bios 56 Asus Strix) TeamRedMiner, it can 220+ mh/s, but consumption too big

[llamafarmer]

RTX 3060 Ti 8GB Samsung Memory
Gigabyte Eagle OC V2 LHR
Hiveos Nanominer - Nicehash pool
90mhs
Core - 500
Mem 2500
PL 130W
Temp 52C

[3187]

My two Hive OS rigs, RX570/RX470, had to setup two rigs, ASUS MB only supports 4 gpu’s

I also have one rig running in Win 10, the RX570 will not run in Linux, runs fine in win environment.

[Avangard]

Hello
Has anyone some better settings for Gainward 3060ti LHR mem Samsung ?

[arysps74]

try…
Core 300
Mem +2150
Power Limit 121W
Fan 70%

[Avangard]

Im using HiveOS and prefere Absolute Core Lock settings because power and temperatures, At this moment hashrate is the same for core 800-1000 and memory 2000-2200. For core more than 1000 hashrate going down

[Lc1975]

Hello.
Can you please share the OC?

Thanks

[1389MaRe]

go with memory 2600 and tell us your hashate

[Edelique]

RX470 4Gb 39.93mh/s
GTX1060 6Gb 38.05mh/s

are these numbers good for those cards?

[3187]

RX 470 should be in the 58-62mh/s easy

Try core at 1150 and mem at 1950, you can see my settings a few posts up

[typo]

Three cards currently mining ERGO. NOTE! All three cards are water-cooled, 3090 with an active backplate.

Miner: T-Rex 0.21.6
OS: Windows 10 Pro 64-bit

Card1: Strix 3090 OC

• Core locked at 1395MHz @ 750mV
• Memory clocks +1500MHz
• Power limit 68%
• Hashrate: 260-265MH/s
• Core temp: 39-43C
• VRAM temp: 58-64C

Card2: Strix 2080Ti

• Core locked at 1350MHz @ 706mV
• Memory clocks: +1250MHz
• Power limit: 53%
• Hashrate: 121MH/s
• Core temp: 39-41C
• Hot spot temp: 52-56C

Card3: Strix 2080Ti

• Core locked at 1350MHz @ 725mV
• Memory clocks: +1250MHz
• Power limit: 53%
• Hashrate: 121MH/s
• Core temp: 39-41C
• Hot spot temp: 52-56C

[siluro]

Can anyone tell me if this can improve a lot more or am i maxed?